Terms and Conditions
Terms and Conditions of Purchase
- Either of the following constitutes your ("Seller") acceptance of these T&Cs: (a) Seller's execution or acknowledgement of a purchase or work order ("Order"); or (b) Seller's commencement of performance of the Order (e.g., promising or commencing performance); provided, however, we ("Buyer") may treat the offer made by the Order as having lapsed before acceptance if Seller fails to so accept within a reasonable period of time. Except as provided in Section 3 (only as to an extended warranty period) and Section 10 below, Orders are subject to and governed exclusively by, and Seller's acceptance thereof is expressly limited to, these T&Cs. Buyer hereby expressly rejects and objects to any prior or subsequently proposed term, condition or alteration. No modification or waiver of these T&Cs shall be binding on Buyer unless expressly accepted in writing by Buyer's authorized officer. Any reference to Seller's quote, bid or proposal does not constitute acceptance of any legal terms or condition thereof.
- Orders may be issued electronically or in writing. The purchase price for goods ("Products") and services sold to Buyer shall be as listed on the Order or as otherwise agreed in writing by the parties. Buyer will pay undisputed portions of valid invoices within sixty (60) days of Buyer's receipt. Buyer may cancel or change Orders without penalty upon at least ten (10) days' notice. If Seller believes any such change will affect the price or delivery date, Seller shall so notify Buyer in writing (with reasonable supporting documentation) within three (3) days of receiving said written direction or the change shall be deemed accepted without modification to the price or date of delivery. Any such modification to price and/or delivery date must be pre-approved by Buyer in writing. No substitutions shall be made without Buyer's prior written consent. Products shall be tendered by Seller in a single delivery unless otherwise agreed. Shipments shall be F.O.B. (INCOTERMS 2010) Buyer's designated destination or otherwise in accordance with shipping terms on the Order. No charge will be allowed for packing, shipping or handling unless stated in the Order. Seller shall pay for damaged Products resulting from improper packing or marking. Itemized packing lists must accompany each shipment. Buyer's count will be final and conclusive on shipments not accompanied by Seller's itemized packing list. Time is of the essence. Seller shall promptly notify Buyer of any actual or anticipated delay and shall take all commercially reasonable steps to avoid or end delays without additional cost to Buyer.
- Seller represents, warrants, and covenants that: (i) it has and will transfer good title to Products upon delivery, free and clear of all liens, claims and encumbrances of any kind; (ii) Products will conform to Seller's standard technical specifications and to all specifications, descriptions, drawings and standards provided by Buyer or otherwise agreed to by Seller, and they will be new, meet the highest industry standards, fit for the purpose(s) normally intended (or specifically intended if such intent is communicated to Seller in the Order or otherwise), and Products and services will be free from defects in design, materials and workmanship; (iii) Products and their use, sale, lease and distribution will not infringe, misappropriate, or violate trademarks, service marks, copyrights, patents, patent rights, trade secrets or other intellectual property rights of a third party; (iv) it will utilize all necessary or desirable protective equipment and devices, whether suggested or required by safety associations, government agencies, municipalities or otherwise; (v) that all services shall be done with the utmost skill, care and diligence, in a good and workmanlike manner, in accordance with the terms hereof and good industry standards of performance and in a timely manner; (vi) it and the Products and services provided to Buyer will comply with all applicable laws, codes, standards and regulations (including, but not limited to anti-corruption and anti-bribery, child labor, affirmative action and conflict minerals); and (vii) it will comply with all aspects of Buyer's Cyber Security Requirements outlined in Appendix 1 as applicable. The foregoing warranties are enforceable by Buyer and its direct and indirect customers receiving such Products (together, "Customers"), and each shall remain valid for the longer of: (1) eighteen (18) months from the date of shipment from Seller; (2) such longer period as is offered by Seller in its then standard warranty; or (3) such longer period as is required by applicable law. If Seller breaches any of the foregoing warranties, Seller shall, at Buyer's election and at Seller's sole cost and expense (including, but not limited to, all transport, packaging, removal, testing, re-install and other labor costs): (a) repair or replace Products or services to Buyer's complete satisfaction; (b) reimburse Buyer for the purchase price paid for such Products or services; or (c) reimburse Buyer for the cost of substitute products or services obtained by Buyer from third-parties. Warranties shall begin anew on the date of repair or replacement pursuant to this Section 3.
- Seller shall indemnify, defend and hold harmless Buyer, its parent, subsidiaries, Customers and affiliates, and its/their officers, directors, employees, agents, contractors and representatives, from and against any and all actual or asserted claims, actions, damages, injuries, fines, penalties, settlements, judgments, losses, costs and expenses (including court costs and attorneys' fees) (collectively "Losses") arising out of, in connection with, or resulting directly or indirectly from: (i) Seller's breach of any representation, warranty or covenant hereunder; (ii) the use, sale, lease or distribution of Products (including, without limitation, for Losses that are attributable, in whole or in part, to contamination, pollution or environmental damage (including clean-up costs), data or security breaches, or any inaccurate or misleading representations or omissions from any Product literature, communication, packaging, warning or instruction relating thereto); (iii) recall of Product initiated or required by Seller, a governmental agency or applicable laws, rules, orders or regulations; or (iv) negligence, gross negligence, recklessness, fraud, strict liability, fault, violation of law, or willful misconduct of Seller, its employees, suppliers, manufacturers, contractors, officers, directors, guests, invitees or agents. Seller acknowledges and agrees that its indemnity obligations under this Section 4 shall be enforceable against Seller regardless of whether or not insurance Seller maintains covers such indemnity obligations. The foregoing shall not be construed to negate, abridge, or otherwise reduce any other right or obligation that would otherwise exist as to any party or person described herein. In the event that any indemnity provisions herein are contrary to applicable law, then such indemnity obligations shall be construed to apply to the fullest extent allowed by applicable law.
- TO THE MAXIMUM EXTENT PERMITTED BY APPLICABLE LAW, IN NO EVENT SHALL EITHER PARTY, OR ITS PARENT OR AFFILIATES, OR ANY OF ITS/THEIR DIRECTORS, OFFICERS, EMPLOYEES OR AGENTS, BE LIABLE HEREUNDER FOR ANY SPECIAL, RELIANCE, CONSEQUENTIAL, EXEMPLARY, PUNITIVE, INCIDENTAL OR INDIRECT DAMAGES, INCLUDING, WITHOUT LIMIT, FROM DAMAGES TO PROPERTY, FOR LOSS OF PROFITS, INCOME, USE OR TIME, WHETHER IN TORT, CONTRACT, OR OTHERWISE RESULTING FROM PERFORMANCE OR NON-PERFORMANCE HEREUNDER, AND WHETHER OR NOT IT/THEY KNEW OF THE POSSIBILITY THEREOF; PROVIDED, HOWEVER, THIS SECTION 5 SHALL NOT LIMIT SELLER'S OBLIGATIONS UNDER SECTIONS 4 OR 12.
- Unless otherwise expressly agreed in writing by Buyer, Seller shall not, and shall not authorize any other party to, use, modify, reproduce or replicate any trademark, logo or trade name owned or claimed by Buyer ("Buyer Marks") in any way. Seller shall not contest Buyer's right of exclusive use of any Buyer Mark. Upon expiration or termination of the Order, Seller will remove and not thereafter use any sign, catalogue, brochure or other material (whether print or electronic) containing any Buyer Mark and Seller will, at Buyer's option, immediately destroy or return to Buyer such material in its possession or under its control containing Buyer Marks. In addition, Seller agrees not to use any Buyer Marks in any promotional material, including without limitation, customer lists, advertisements, or press releases, without Buyer's advance written authorization.
- The occurrence of any one or more of the following shall constitute an "Event of Default": (i) delivery of services or Products failing to conform to any provision hereof ("Non-Conforming Products"); (ii) Seller's breach or failure to perform its obligations hereunder; or (iii) Seller's breach or misrepresentation of any representation or warranty herein. Upon an Event of Default, Buyer shall be entitled, but not required, to exercise any or all of the following: (i) for late delivery or performance, Buyer may extend the time therefore and/or require expedited shipping/services, and such Products/services shall be provided in the manner and per the timelines specified by Buyer, at Seller's sole cost; (ii) with respect to Non-Conforming Products, Buyer shall have all of the rights and remedies available under Sections 3 and 4 above; (iii) reject or revoke acceptance, as the case may be, of all or any portion of the shipment of Products containing any Non-Conforming Products; and/or (iv) exercise any other rights and remedies specified in the Order or otherwise available under applicable law. Buyer may exercise any one or more of the foregoing rights and remedies by notifying Seller of such intent. Buyer shall not be liable to Seller on account of exercising any such rights or remedies. Seller acknowledges and agrees that the occurrence of an Event of Default constitutes a substantial impairment of value to Buyer of the shipment at issue, the entire Order, and any other then pending Orders, so as to entitle Buyer to exercise any and/or all of the remedies specified herein, in the Order, and at law, and Seller hereby waives its right to cure the default in question, unless otherwise agreed in writing by Buyer. The making of or failure to make any inspection of or payment for the Products shall in no way impair Buyer's right to reject Non-Conforming Products, nor be deemed acceptance by Buyer of the Products, nor affect in any way Seller's obligations hereunder, notwithstanding Buyer's opportunity to inspect the Products, Buyer's knowledge of the non-conformity or defect, its substantiality or the ease of its discovery, nor Buyer's earlier failure to reject the Products.
- All questions pertaining to the validity, construction, execution and performance of the Order and the relationship of the parties hereto shall be construed and governed by the laws of Delaware and the USA, without giving effect to the principles of (i) comity of nations; or (ii) conflicts or choice of law provisions thereof, and the Order shall not be governed by the U.N. Convention on Contracts for the International Sale of Goods. Exclusive jurisdiction shall be in the appropriate state or federal court in the state of Buyer's principal place of business.
- Seller certifies that it has an affirmative action policy ensuring equal employment opportunity without regard to, and that it maintains no employee facilities segregated on the basis of, race, color, national origin, sex, age, sexual orientation, religion or handicap, and that it is not debarred or suspended from being awarded Federal or Federally assisted contracts. If applicable, the following laws, orders and regulations, as amended, are hereby incorporated: Executive Order 11246; Vietnam Era Veterans Readjustment Act; Rehabilitation Act of 1973; Veterans Compensation, Education and Employment Act; 41 CFR 60-1.4 (Equal Employment Opportunity); 41 CFR 60-250.4 ?(Veterans Affirmative Action); 41 CFR 60-741.4 (Handicap Affirmative Action); 41 CFR 601.40 (Affirmative Action Plans); 41 CFR 601.7 (EE01 Reports); 41 CFR 61650 (Veterans Employment Reports). Seller certifies and warrants that it is and shall remain in compliance with all applicable anti-corruption and anti-bribery laws and that the Products are produced in compliance with the Fair Labor Standards Act of 1938, as amended, and the regulations and orders of the U.S. Department of Labor issued thereunder, and that each invoice it submits is correct and authentic and the only one issued for the Products at issue, and that all Products comply with the Occupational Safety and Health Act of 1970, as amended, and the applicable state plans approved under same, and the regulations thereunder, to the extent applicable. Seller shall notify Buyer in writing if Products are subject to laws or regulations relating to hazardous or toxic substances, or when disposed of, to regulations governing hazardous wastes, or to any other health, safety and/or environmental regulations. Seller shall furnish all appropriate shipping certifications, labeling in compliance with the Workplace Hazardous Materials Information System, Material Safety Data Sheets in compliance with the Workplace Hazardous Materials Information System, and instructions for shipping, safety, handling, exposure and disposal in a form sufficiently clear for use and actions to be taken by Buyer's and its Customer's non-technical personnel.
- Without limiting Seller's obligations or liabilities hereunder, Seller shall, on the date an Order is accepted and for a period of two (2) years thereafter, at its sole expense, purchase and maintain the following insurance coverage with carriers that have A.M. Best ratings of not less than A- and with a minimum financial rating of Class VII: (a) Commercial General Liability Insurance that covers all liabilities for bodily injury and property damages arising from the Products, services and/or the performance of an Order, with limits of liability of at least $5,000,000 for each occurrence and in the aggregate. Coverage must include Products/Completed Operations, Personal and Advertising Injury and Blanket Contractual Liability (CG 20 10 or its equivalent must be provided). Such CGL insurance may be maintained through any applicable combination of CGL and Excess/Umbrella Coverage; (b) Automobile Liability Insurance that covers all liabilities for bodily injury and property damages arising from the use of all owned, hired or non-owned vehicles, with limits of liability of at least $1,000,000 for each occurrence and in the aggregate; (c) Workers Compensation Insurance shall be statutory by state law and Employer's Liability Insurance with limits of liability of at least $1,000,000; (d) Product Liability Insurance that covers the Products with limits of liability of at least $5,000,000 in the aggregate; and (e) Technology Errors & Omissions Liability Insurance, with a minimum limit of $5,000,000 per claim and in the aggregate, covering all Products including failure of information technology security, data privacy breach and software copyright infringement (if coverage is on a claims-made basis, the policy must contain a retro date which precedes the effective date of the Order and continuity must be maintained for 1 (one) year following termination or expiration of the Order). All insurance coverage required herein for Seller shall extend to and protect Buyer and its subsidiaries, parent company and/or affiliates to the full amount of such coverage, and all deductibles and/or self-insured retentions (if any), including those related to defense cost, are the sole responsibility of Seller and, upon Buyer's request, Seller shall disclose the same to Buyer. All policies, except the Workers' Compensation insurance, shall be endorsed to name Buyer, its parent and affiliated entities, and its/their directors, officers, employees, representatives, and agents, as an additional insured and such policies shall be endorsed to waive all express or implied rights of subrogation against Buyer, its parent and affiliated entities. The insurance coverage set forth above shall be primary to any liability insurance or other insurance carried by Buyer, its affiliates or parent and Buyer's, its affiliate's and parent's other insurance shall be excess and non-contributory for claims and losses arising out of the performance of an Order. Seller shall provide a coverage endorsement for each category of insurance required above, except for Workers' Compensation, which includes a cross liability clause, stating that the Seller and Buyer shall each be considered as a separate entity. The policies shall not be canceled, terminated or materially reduced without thirty (30) days' advance written notice to Buyer. Seller shall provide Buyer with a Certificate of Insurance evidencing the above-required types and amounts of insurance coverage and other requirements prior to selling Products and providing services to Buyer and on an annual basis thereafter. Failure of the Seller to provide Buyer the Certificate of Insurance or failure of Buyer to specifically request such certificate, shall in no way limit or release the Seller of its obligations or liabilities under this Section 10. In the event the Seller or its insurance carrier defaults on any obligation hereunder, Seller agrees that it will be liable for all reasonable expenses and attorneys' fees incurred by Buyer or its affiliates to enforce the provisions hereunder.
- Unless Buyer and Seller are currently entered into a separate, written agreement that specifically governs their business relationship and the subject matter of the Order, and unless that written agreement specifically contains a merger clause that addresses conflicting terms and conditions in purchase orders, invoices, etc., then these T&Cs constitute the entire agreement and understanding between the parties, and supersede and replace all prior negotiations and agreements, proposed or otherwise, whether written or oral, concerning the subject matter hereof. No course of dealing, usage of trade or course of performance shall be relevant to explain, supplement or modify any express provision of these T&Cs.
- Buyer may disclose Confidential Information (as defined below) to Seller in connection with its purchase of Products and services from Seller. Seller shall not disclose any Confidential Information or any portion thereof to any person or entity and shall only use such Confidential Information to fulfill its obligations hereunder, it being understood that such Confidential Information provides Buyer with a competitive advantage in its trade because it is not generally known or available to the public. In that regard, Seller acknowledges and agrees that Buyer has taken and is taking reasonable steps to protect the confidentiality of, and its legitimate interests in, the Confidential Information. The term "Confidential Information" means information concerning Buyer's business, personnel, data, financial and marketing plans, intellectual property rights (including, without limitation, patents, trademarks, copyrights and trade secrets), forecasts, strategies and statements, and Customer related information. To the extent allowed by law, Seller shall notify Buyer in writing in advance of any disclosure of Confidential Information required by law, court or administrative order.
- All notices permitted, required or provided for herein shall be made in writing, and shall be deemed adequately delivered if delivered by hand, certified mailing in the U.S. mail with return receipt requested, or by a recognized courier service that regularly maintains records of its pick-ups and deliveries, to the parties at their respective addresses, as set forth on the face of the Order or as otherwise designated by a party hereto. Any waiver of any of the provisions herein or of any inaccuracy in or non-fulfillment of any of the representations, warranties or obligations hereunder or contemplated hereby, shall not be effective unless made in writing and signed by the party against whom the enforcement of such waiver is sought. Any provision of these T&Cs that is deemed invalid or unenforceable in any jurisdiction shall, as to such jurisdiction only, be ineffective only to the extent of such invalidity or unenforceability, without rendering invalid or unenforceable or otherwise affecting the remaining terms and provisions hereof. Neither party may assign or otherwise delegate any of its rights or obligations hereunder without the prior written consent of the other party, which consent will not be unreasonably withheld, delayed or conditioned; provided, however, Buyer shall have the right to assign Orders without Seller's consent to an affiliate of Buyer. The provisions hereof that by their nature are intended to survive the termination, cancellation, completion or expiration of the Order shall continue as valid and enforceable obligations of the parties notwithstanding any such termination, cancellation, completion or expiration. To the maximum extent permitted by applicable law: (i) Seller's warranties are fully-enforceable by Buyer and its Customers (as intended third-party beneficiaries); and (ii) the indemnities provided hereunder are fully-enforceable by Buyer and/or any or all of the other indemnitees identified above in Section 4.
Cyber Security Requirements
- Seller shall ensure all Products have been developed in accordance with principles of secure software development consistent with software development industry best practices, including, but not limited to, security design review, secure coding practices, risk based testing and remediation requirements. Seller must use reasonable measures to secure the software development environment of the Products from unauthorized access.
- Seller shall include cyber security guidance in the Product documentation provided to Buyer. This documentation shall include guidance on how to configure the Products and/or the surrounding environment to best ensure security. It shall also include guidance on which logical or physical ports are required for the Product to function. If authentication is used to protect access to any service or capability of the Products, regardless of the intended user of that service/capability, the Seller shall ensure:
2.1 the Products shall not provide access to that service or capability using a default account/password;
2.2 the Products shall not provide access to that service or capability using a "Backdoor" account or password;
2.3 the Products' associated authentication and password change processes shall be implemented with an appropriately secure cryptographic level; and
2.4 Buyer shall be able to change any passwords supported by the Products.
- In the event that any wireless technology is incorporated in any Product, Seller shall document that the wireless technology complies with standard operational and security requirements specified in applicable wireless standard(s) or specification(s) (e.g., applicable IEEE standards, such as 802.11).
- In the event that any cryptographic systems are contained in the Product, Seller shall only use cryptographic methods that are "Approved" as defined in the Federal Information Processing Standard (FIPS) Security Requirements for Cryptographic Modules (FIPS 140-2), and Seller shall provide an automated remote key-establishment (update) method that protects the confidentiality and integrity of the cryptographic keys.
- Seller must develop and maintain an up-to-date Cyber Security Susceptibility management plan designed to promptly identify, prevent, investigate, and mitigate any Cyber Security Susceptibilities and perform any required recovery actions to remedy the impact. "Cyber Security Susceptibility (ies)" is defined as any bug, software defect, design flaw, or other issue with software associated with a Product that could adversely impact the confidentiality, integrity or availability of information or processes associated with the Product.
- Seller shall notify Buyer within a reasonable period, in no event to exceed five (5) business days after discovery, or shorter if required by applicable law or regulation, of any potential Cyber Security Susceptibility. Seller shall report any Cyber Security Susceptibility to Buyer. Within a reasonable time thereafter, Seller shall provide Buyer, free of charge, with any upgrades, updates, releases, maintenance releases and error or bug fixes necessary to remediate any Cyber Security Susceptibility. Seller shall reasonably cooperate with Buyer in its investigation of a Cyber Security Susceptibility, whether discovered by Seller, Buyer, or a third party, which shall include providing Buyer a detailed description of the Cyber Security Susceptibility, the remediation plan, and any other information Buyer reasonably may request concerning the Cyber Security Susceptibility, as soon as such information can be collected or otherwise becomes available. Buyer or Buyer's agent shall have the right to conduct a cyber security assessment of the applicable Products, and the Product development lifecycle, which includes tests intended to identify potential Cyber Security Susceptibilities. Seller shall designate an individual responsible for management of the Cyber Security Susceptibility, and shall identify such individual to Buyer promptly.
- Seller represents, warrants and covenants that all open source software contained within the Products are and shall be in material compliance with the terms and conditions of the applicable licenses governing their use, and the Products or the use thereof by Buyer shall not cause Buyer or Buyer's intellectual property rights to be subject to the terms or conditions of a copyleft license, or require Buyer to fulfill any open source license obligations for any open source software contained within the Products.
- Seller represents, warrants, and covenants that the Products shall be free of viruses, malware, and other harmful code (including, without limitation, time-out features) which may interfere with the use of the Products regardless of whether Seller or its personnel purposefully placed such code in the Products. In addition to exercising any of Buyer's other rights and remedies under the Order or otherwise at law or in equity, Seller shall provide Buyer, free of charge, with any and all new versions, upgrades, updates, releases, maintenance releases, and error or bug fixes of the Products (collectively, "Revised Code") which prevents a breach of any of the warranties provided under the Order or corrects a breach of such warranties. Revised Code contained in the Products constitutes Products for purposes of the Order.
Terms and Conditions of Sale
- Governing Terms. By accessing, browsing, or otherwise using our website, requesting a quote, establishing a line of credit, placing an order, issuing a release, or accepting products or services from Brook Electrical Supply Company (“Seller”), you acknowledge and agree that all products and services provided by or on behalf of Seller to you and/or your subsidiaries or affiliates (collectively, “Customer”) shall be governed exclusively by these Terms and Conditions of Sale (“T&Cs”), which shall control regardless of any additional or conflicting legal terms and/or conditions contained on or referenced in any quotation, order, acknowledgement, invoice, website, release, correspondence, request, proposal, or other document or form issued by or on behalf of Customer, including, but not limited to, at any time in the course of dealing or performance, all of which are hereby rejected and deemed void and of no force or effect. Seller’s acknowledgment and/or acceptance of an order shall not be deemed an acceptance of any such other terms and/or conditions or a waiver of the provisions hereof; instead, these T&Cs may only be modified, waived, supplemented, or superseded with the express prior written consent of an authorized officer of Seller (i.e., with title of Vice President or President). Notwithstanding the foregoing, Seller reserves the right, in its sole discretion, to periodically revise these T&Cs without notice. Seller reserves the right to accept or reject any order.
- Payment Terms. Payment for all amounts due hereunder shall be due net thirty (30) days from date of invoice (the “Payment Date”) unless otherwise expressly agreed to by Seller and Customer in writing; provided, however, Seller may, in its sole discretion, require full payment in cash before order entry, shipment, or delivery. Payments not received when due will be subject to a late fee of 1.5%, or the maximum lawful rate, whichever is lower, of the outstanding invoice balance for each 30 day period or portion thereof past due. All costs of collecting monies due from Customer, including, but not limited to, legal expenses, legal interest, attorneys’ fees and collectors’ expenses, shall be paid by Customer to Seller upon demand. When Seller deems itself insecure with respect to Customer’s ability to pay, Seller may, in its sole discretion: (a) withhold, defer, or cancel shipments and/or orders; (b) require cash in advance; (c) demand immediate payment of all amounts then owed and pursue collection actions (including attorneys’ fees and costs of collection); and/or (c) impose, revoke, or revise Customer’s credit limits. Seller may also impose, revoke, or revise Customer’s credit limits, if any, at any time and for any reason. Customer agrees to give Seller current credit information, current annual financial statements, and proper authorizations for Seller to request financial information on Customer (including its subsidiaries and affiliates) from third parties, in each case, within five (5) days of request from Seller as a condition to beginning and/or continued credit extension. All amounts and payments are in U.S. dollars. Seller may set-off and/or deduct for any sums owed by Customer (including its subsidiaries and affiliates). Customer has no right to withhold or set-off amounts against Seller or its affiliates.
- Returns. Orders that were factory special orders or otherwise fabricated and altered to accommodate Customer are not returnable; otherwise, returns will be accepted prior to the Payment Date if prior authorization is obtained from Seller, which authorization shall be in Seller’s sole discretion, the product is in resalable condition and in the original, undamaged manufacturer’s package with sales receipt or invoice. Credit will be issued, if at all, based on Customer’s purchase price for the returned product less any vendor restocking charges, freight, insurance, and other expenses of disposal.
- Deliveries. Customer shall accept partial or pro rata deliveries in commercial units as full performance under Customer’s order if Seller is unable to fill Customer’s entire order. All goods shall be shipped FOB SHIP POINT, prepaid and billed, unless otherwise agreed by Seller in writing. Title and risk of loss pass to Customer on tender of delivery to the carrier. If goods are damaged in transit, Customer’s sole recourse is to file a claim with the carrier. Customer understands that delivery dates are estimates only and Seller shall not be liable for any late or delayed delivery.
- Warranties and Disclaimer. Customer acknowledges that Seller is a distributor and not a manufacturer and that Seller is not responsible for the design, fabrication, or manufacture of any materials, equipment, tools, or other goods provided by or on behalf of Seller, including for any defects therein. Seller is also not liable for defects in information, labeling, instructions, or packaging provided by secondary sources. Any warranty issued by the manufacturer shall be solely that of the manufacturer and not of Seller. Seller warrants good title to Customer and otherwise Seller shall assign to Customer, effective upon transfer of title, all assignable warranties of the manufacturer. Seller hereby authorizes Customer to make or settle any claims under such manufacturer’s warranties directly with any such manufacturer. Each jurisdiction’s laws, regulations, codes, and standards may vary regarding product labeling, warnings, instructions, specifications, manufacture, and installation, as well as regarding construction, zoning, and/or use of products for a specific purpose; thus; Customer agrees that certain products may not be appropriate for all areas or applications and Customer hereby agrees that Customer is solely responsible for ensuring proper compliance with all such laws, rules, regulations, codes, and standards. Customer shall comply with all applicable laws, rules, codes, standards, and regulations including, but not limited to, those concerning exports, anti-corruption, anti-bribery, child labor, affirmative action, and conflict minerals. EXCEPT FOR THE WARRANTIES OF TITLE ABOVE, SELLER MAKES NO WARRANTY, EXPRESS OR IMPLIED, AND DISCLAIMS ALL OTHER WARRANTIES, INCLUDING, WITHOUT LIMITATION, ANY WARRANTY OF MERCHANTABILITY, FITNESS FOR PARTICULAR PURPOSE, OR NON-INFRINGEMENT, ANY WARRANTY AGAINST DEFECTS IN DESIGN, MATERIALS OR WORKMANSHIP, AND ANY WARRANTY ARISING BY USAGE OF TRADE, COURSE OF DEALING, OR COURSE OF PERFORMANCE. CUSTOMER’S EXCLUSIVE REMEDIES AGAINST SELLER FOR BREACH OF WARRANTY ARE REPAIR OR REPLACEMENT OF GOODS, REPERFORMANCE OF SERVICES, OR CREDIT OF THE PURCHASE PRICE PAID, AT SELLER’S OPTION, WHICH MAY ONLY BE EXERCISED WITHIN ONE (1) YEAR OF PERFORMANCE (FOR SERVICES) OR SHIPMENT (FOR GOODS). SELLER’S OBLIGATIONS UNDER THIS SECTION 5 SHALL BE VOID UNLESS CUSTOMER PROVIDES SELLER WITH WRITTEN NOTICE OF THE NON-CONFORMITY IN THE GOOD OR SERVICE WITHIN THIRTY (30) DAYS OF DISCOVERY.
- LIMITATIONS OF LIABILITY. TO THE MAXIMUM EXTENT PERMITTED BY APPLICABLE LAW, THE PARTIES AGREE THAT IN NO EVENT SHALL SELLER BE LIABLE TO CUSTOMER OR ITS OWNERS OR AFFILIATES, OR ITS/THEIR RESPECTIVE OFFICERS, DIRECTORS, EMPLOYEES, CUSTOMERS, AGENTS, CONTRACTORS, ASSIGNEES, OR REPRESENTATIVES, FOR: (A) ANY SPECIAL, CONSEQUENTIAL, EXEMPLARY, PUNITIVE, LIQUIDATED, INCIDENTAL, OR INDIRECT DAMAGES, INCLUDING, WITHOUT LIMITATION, FOR LOSS OF PROFITS, USE, TIME, DATA, OR INCOME, WHETHER IN CONTRACT, TORT, OR OTHERWISE RESULTING FROM ITS PERFORMANCE, NON PERFORMANCE, OR DELAY HEREUNDER, AND WHETHER OR NOT SELLER HAD NOTICE OF THE POSSIBILITY THEREOF; AND (B) CLAIMS ARISING FROM ORDINARY WEAR AND TEAR, MISUSE, ABUSE, MISREPAIR, MISAPPLICATION, MODIFICATION, UNAUTHORIZED COMBINATION, IMPROPER SELECTION, FAILURE TO MAINTAIN, AND/OR IMPROPER INSTALLATION OF GOODS.
- SUBSTITUTE LIMITATION. IF A COURT OF COMPETENT JURISDICTION HOLDS THAT THE ABOVE LIMITATIONS OF WARRANTIES, LIABILITIES, AND REMEDIES CONTAINED HEREIN, OR ANY PORTIONS THEREOF, ARE VOID OR UNENFORCEABLE FOR ANY REASON, CUSTOMER EXPRESSLY AGREES THAT UNDER NO CIRCUMSTANCE SHALL SELLER’S TOTAL LIABILITY TO CUSTOMER EXCEED THE AMOUNT PAID FOR THE GOOD OR SERVICE GIVING RISE TO THE CLAIM AT ISSUE.
- Governing Law; Limitations. SOME STATES DO NOT ALLOW LIMITATIONS ON IMPLIED WARRANTIES OR THE EXCLUSION OR LIMITATION OF CERTAIN DAMAGES. IF THESE LAWS APPLY, SOME OR ALL OF THE ABOVE DISCLAIMERS, EXCLUSIONS, AND/OR LIMITATIONS MAY NOT APPLY AND OTHER RIGHTS MAY BE AVAILABLE. The validity, interpretation, and performance hereof, and any dispute connected herewith, shall be governed and construed in accordance with the laws of the State of Delaware, without regard to its conflict of laws principles. The provisions of the Uniform Commercial Code as adopted by the State of Delaware shall apply, with no application of the 1980 United Nations Convention on Contracts for the International Sale of Goods. Notwithstanding the foregoing, any legal action by Customer concerning these T&Cs and/or any goods or services provided by or on behalf of Seller must be commenced within one (1) year after the cause of action has arisen.
- Taxes and Other Governmental Amounts. Customer shall pay any and all taxes, duties, tariffs, import fees, export fees, penalties, and similar charges levied by any government authority or agency in connection with goods and/or services provided by or on behalf of Seller to Customer. Unless otherwise expressly agreed by Seller in writing, such charges are not included in the price of goods or services and will be added to amounts due by Customer. Customer is responsible for all additional taxes, fees, duties, and penalties from taxing or other governmental authorities or agencies, and all legal expenses incurred by Seller, where arising due to changes in such amounts between the date of order and shipping or from incorrect or incomplete documentation or other information furnished by Customer.
- Force Majeure. Seller shall not be liable for any delay, impairment, or prevention of Seller’s performance, in whole or in part, due to any event, circumstance, or occurrence that is not within Seller’s control, including, but not limited to, acts of God, labor disruptions, acts of war, acts of terrorism (actual or threatened), governmental decrees or controls, imposition of or changes to tariffs or duties, changes to commodity markets, insurrections, epidemics, quarantines, shortages, communication or power failures, fires, accidents, explosions, inability to procure or ship products or obtain permits or licenses, inability to procure supplies or raw materials, severe weather, catastrophic events, or any other event, circumstance, or cause beyond Seller’s control within the normal conduct of its business (collectively, “Force Majeure”). If Seller’s performance is so delayed, impaired, or prevented by Force Majeure, Customer agrees that Seller may, at Seller’s option: (i) suspend or terminate performance; and/or (ii) increase pricing and/or schedules for delivery or performance, in each case, without liability or penalty to Seller.
- Hazardous Substances. Customer acknowledges that Seller has neither created nor contributed to the creation or existence of any hazardous or otherwise dangerous substances or conditions at Customer’s sites, and Seller’s compensation hereunder is not commensurate with the potential risk of injury or loss that may be caused by exposure to, contamination by, or the presence of such substances or conditions.
- Product-Specific Clauses.
(a) ELECTRONIC AND PHOTOGRAPHIC CLEANING FLUIDS CUSTOMERS — It is a violation of federal law to sell, distribute, or offer to sell or distribute any chlorofluorocarbon (CFC) containing cleaning fluid for electronic and photographic equipment or aerosol hydrochlorofluorocarbon (HCFC) containing cleaning fluid for electronic and photographic equipment to anyone who is not a commercial user of this product. The penalty for violating this prohibition can be up to $25,000 per unit sold. Customers purchasing such products must present proof of their commercial status in accordance with 40 CFR 82.68(a) or (c). A "Commercial User," as defined in the regulation, means a person that uses the product in the purchaser's business, or sells it to another person and has one of the following identification numbers: (i) a Federal employer identification number; (ii) a State sales tax exemption number; (iii) a Local business license number; or (iv) a Government contract number.
(b) MOLD RELEASE AGENT CUSTOMERS – It is a violation of federal law to sell mold release agents containing hydrochlorofluorocarbon (HCFC) as propellants to anyone, except for use in applications where no other alternative except a class I substance is available. The penalty for violating this prohibition can be up to $25,000 per unit sold.
(c) WASP AND HORNET SPRAY CUSTOMERS – It is a violation of federal law to sell or distribute wasp and hornet sprays containing hydrochlorofluorocarbon (HCFC) as solvents to anyone, except for use near high-tension power lines where no other alternative except a class I substance is available. The penalty for violating this prohibition can be up to $25,000 per unit sold.
(d) REFRIGERANT CUSTOMERS — Effective November 14, 1994, in accordance with the Federal Clean Air Act, sale of class I (CFC) and class II (HCFC) refrigerant will be restricted to resale purchases and/or to certified professional service technicians. To purchase regulated refrigerant products, Customer must present a certification card or sign a statement of resale to complete the purchase.
(e) OSHA HAZARDOUS SUBSTANCE & CALIFORNIA PROPOSITION 65 PRODUCT INFORMATION— MSDS for OSHA-defined hazardous substances are available at your local Seller branch, or by contacting Seller's U.S. corporate headquarters. Seller makes no warranty with respect to the accuracy of the information or the suitability of the recommendations in the MSDS, all of which are provided by the manufacturers at issue, and, to the maximum extent permitted by applicable law, Seller disclaims any and all liability to Customer or any user or consumer with respect thereto. Proposition 65 is a California law requiring the state to maintain a list of chemicals that may cause cancer, birth defects, or reproductive harm. There are over 850 listed chemicals and Seller will attempt to provide a reasonable warning before potentially exposing Californians to such chemicals, but Customer acknowledges and agrees that Seller is a distributor and not a manufacturer of such goods and that Seller thus makes no warranty with respect to the accuracy, reasonableness, or suitability of the information or warnings provided in connection therewith, it being understood and agreed that such information and warnings are provided by the manufacturers at issue. Thus, to the maximum extent permitted by applicable law: (i) Seller disclaims any and all liability with respect thereto; and (ii) Customer hereby releases Seller and its parents and affiliates from and for any and all claims, fines, penalties, and damages arising from or in connection therewith, it being agreed that Customer’s sole recourse under Proposition 65 shall be against the manufacturer at issue. To learn more about Proposition 65, please visit http://www.oehha.ca.gov.
(f) MATERIALS OF TRADE — Customer represents that if it is purchasing goods as its "materials of trade" as defined in the Hazardous Materials Regulations in Title 49 of the Code of Federal Regulations, that the goods will be used in direct support of its business, which is not transportation, and that such goods shall not be resold or transported in a vehicle other than one owned by itself.
- Intellectual Property. Customer shall have no right, title, or interest in, to, or under Seller’s trademarks, tradenames, patents, copyrights, domain names, trade dress, product names, catalogs, or other intellectual property rights, or to any such intellectual property rights of the manufacturers or sub-suppliers of products provided by or on behalf of Seller pursuant hereto.
- Independent Contractor. The status of Seller and its personnel and any subcontractors is and will be that of independent contractors, and no such personnel or subcontractors will, at any time or for any purpose, be deemed Customer’s employees or agents.
- Dispute Resolution. The parties shall exercise their best efforts to resolve by negotiation any and all disputes, controversies, or differences arising out of or relating to these T&Cs or the goods or services provided by or on behalf of Seller to Customer in connection herewith. All disputes, controversies or differences between the parties that are not settled by negotiation shall be decided by litigation in the appropriate State or Federal Courts located in Wilmington, Delaware.
- Security Interest. Customer hereby grants Seller a first priority purchase money security interest and/or chattel mortgage in the products and any accounts receivable, cash, or other proceeds resulting from insurance or the resale thereof until full and final payment is made to Seller. Customer shall file, and it hereby permits and authorized Seller to file, all financing statements and other applicable documentation necessary to perfect, confirm and continue the validity, priority and enforceability of such liens and/or security interests. Customer further authorizes Seller to notify any creditor asserting a security interest in Customer’s assets that Seller has been granted a purchase money security interest and/or chattel mortgage in the products.
- Assignment. Customer shall not assign any order, or interest therein, without Seller’s express prior written authorization. Actual or attempted assignment without Seller’s prior written consent shall be void and unenforceable and shall entitle Seller to cancel such order upon notice to Customer.
- Third Parties. These T&Cs are solely for the benefit of the parties hereto and no other person or party is conferred any rights, benefits or claims. 19. Severability. If any term in these T&Cs is to any extent found invalid or unenforceable, such term shall be excluded to the extent of such invalidity or unenforceability and all other terms hereof shall remain in full force and effect; and, to the extent permitted and possible, the invalid or unenforceable term shall be deemed replaced by a term that is valid and enforceable and that comes closest to expressing the intention of such invalid or unenforceable term. If such replacement is not permitted and possible, the invalid or unenforceable term shall be severed from these T&Cs and the remaining terms and conditions shall be valid and fully enforceable as written.
- Entire Agreement. These T&Cs, together with the commercial (i.e., non-legal) terms of Seller’s forms, acknowledgements, quotations and invoices, constitute the entire and exclusive agreement between Seller and Customer. All typographical or clerical errors made in these T&Cs or by Seller in any quotation, acknowledgement, or publication are subject to correction by Seller, in its sole discretion.
1. Acceptance of Terms
3. Other Sonepar web sites
4. Specific terms
6. Limitation of damages
7. Linking to this web site
8. Trademarks and service marks
9. User Conduct
10. Jurisdiction and Choice of Law
1/ Acceptance of Terms
>>back to top
>>Back to top
3/ Other Sonepar web sites
>>Back to top
4/ Specific terms
>>Back to top
Brook Electrical Supply endeavors to provide current and accurate information on the Web Site. However, misprints, errors, inaccuracies, omissions (including incorrect specifications for products) or other errors may sometimes occur. You should independently evaluate the accuracy of the information and the usefulness for your particular needs of any product or service available through the Web Site. Brook Electrical Supply cannot guarantee that products and services advertised on the Web Site will be available when ordered or thereafter. Specifications for products and services are subject to change without notice, and Brook Electrical Supply reserves the right to make changes to processing, materials or configuration without notice. Brook Electrical Supply does not warrant that the content of the Website including, without limitation, product descriptions or photographs, is accurate or complete.
Brook Electrical Supply reserves the right to reject any order you place with us, and/or or to limit quantities on any order, without giving any reason. If we reject your order, we will generally attempt to notify you using the e-mail address you gave us when you placed the order.
>>Back to top
6/ Limitation of damages
Although care has been taken to ensure the accuracy of the information on this Web Site, Brook Electrical Supply assumes no responsibility therefore ALL CONTENT IS PROVIDED "AS IS" AND "AS AVAILABLE". Brook Electrical Supply HEREBY EXPRESSLY DISCLAIMS ANY REPRESENTATIONS OR WARRANTIES OF ANY KIND, EXPRESS OR IMPLIED, INCLUDING WITHOUT LIMITATION WARRANTIES OF MERCHANTABILITY, FITNESS FOR ANY PARTICULAR PURPOSE, NON-INFRINGEMENT, OR AS TO THE OPERATION OF THIS WEB SITE OR THE CONTENT. Brook Electrical Supply DOES NOT WARRANT OR MAKE ANY REPRESENTATIONS AS TO THE SECURITY OF THIS WEB SITE. YOUR USE OF THIS WEB SITE IS AT YOUR OWN RISK YOU ACKNOWLEDGE ANY INFORMATION SENT MAY BE INTERCEPTED. Brook Electrical Supply DOES NOT WARRANT THAT THE WEB SITE OR THE SERVERS WHICH MAKE THIS WEB SITE AVAILABLE OR ELECTRONIC COMMUNICATIONS SENT BY Brook Electrical Supply ARE FREE FROM VIRUSES OR ANY OTHER HARMFUL ELEMENTS.
IN NO EVENT SHALL Brook Electrical Supply, ITS PARENT COMPANY OR ANY OF ITS AFFILIATES BE LIABLE FOR ANY DIRECT, INDIRECT, CONSEQUENTIAL, PUNITIVE, SPECIAL OR INCIDENTAL DAMAGES (INCLUDING, WITHOUT LIMITATION, DAMAGES FOR LOSS OF BUSINESS, CONTRACT, REVENUE, DATA, INFORMATION OR BUSINESS INTERRUPTION) RESULTING FROM, ARISING OUT OF OR IN CONNECTION WITH THE USE OF, OR INABILITY TO USE THIS WEB SITE OR THE CONTENT, EVEN IF Brook Electrical Supply HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. ANY ACTION BROUGHT AGAINST Brook Electrical Supply PERTAINING TO OR IN CONNECTION WITH THIS WEB SITE MUST BE COMMENCED AND NOTIFIED TO Brook Electrical Supply IN WRITING WITHIN ONE (1) YEAR AFTER THE DATE THE CAUSE FOR ACTION AROSE.
>>Back to top
7/ Linking to this web site
This Web Site may provide links to other web sites that are not under the control of Brook Electrical Supply. Brook Electrical Supply shall not be responsible in any way for the content of such other web sites. North East provides such links only as a convenience to the user of this Web Site, and the inclusion of any link to any such web sites does not imply endorsement by Brook Electrical Supply of the content of such web sites or, unless expressly disclosed otherwise, any sponsorship, affiliation or association with its owner, operator or sponsor, nor does Brook Electrical Supply's inclusion of the links imply that Brook Electrical Supply is authorized to use any trade name, trademark, logo, legal or official seal or copyrighted symbol that may be reflected in the linked web site.
>>Back to top
8/ Trademarks and service marks
Unless otherwise explicitly stated, copyright and all other proprietary rights in the Content (including but not limited to software, audio, video, text and photographs) rests with Sonepar USA or any of its affiliates or their licensees, irrespective of whether a copyright symbol or statement is present. There are a number of proprietary logos, service marks, trademarks, slogans and product designations found on this Site. By making them available on this Site, Sonepar USA or any of its affiliates are not granting you a license to use in any fashion. Access to this Site does not confer upon you a license under any of Sonepar's USA or any of its affiliates or any third party's intellectual property rights. Except as otherwise provided, the Content published on this Web Site may be reproduced or distributed in unmodified form for personal non-commercial use only. Any other use of the Content, including without limitation distribution, reproduction, modification, display or transmission without the prior written consent of Sonepar USA or any of its affiliates is strictly prohibited. All copyright and other proprietary notices shall be retained on all reproductions. Our policy is to comply with all intellectual property laws, and to act expeditiously upon receiving any notice of claimed infringement. If you believe that your work has been reproduced on this website in a manner that constitutes copyright infringement, please provide a notice of copyright infringement identifying the original copyrighted work and the portions of the Brook Electrical Supply site that is claimed to be infringing such copyright. Any material or information sent through or in connection with this Web Site by you ("User Materials") will be treated as non-confidential and non-proprietary, and immediately become the property of North East or any of its affiliates, subject to any privacy policies posted on this Web Site. Brook Electrical Supply may use such User Materials as it deems fit, anywhere in the world, without obligation for compensation, and free of any moral rights, intellectual property rights and/or other proprietary rights in or to such User Materials.
The Web Site may contain references to specific products and services that may not be (readily) available in a particular country. Any such reference does not imply or warrant that any such products or services shall be available at any time in any particular country. Please contact your local Brook Electrical Supply business contact for further information.
Software made available for downloading from or through this Web Site is licensed subject to the terms of the applicable license agreement. Except as set forth in the applicable license agreement, the software is made available for use by end users only and any further copying, reproduction or redistribution of the software is expressly prohibited. WARRANTIES, IF ANY, WITH RESPECT TO SUCH SOFTWARE SHALL ONLY APPLY AS EXPRESSLY SET FORTH IN THE APPLICABLE LICENSE AGREEMENT. Brook Electrical Supply HEREBY EXPRESSLY DISCLAIMS ALL FURTHER REPRESENTATIONS AND WARRANTIES OF ANY KIND, EXPRESS OR IMPLIED, INCLUDING WARRANTIES OF MERCHANTABILITY, FITNESS FOR ANY PARTICULAR PURPOSE OR NON-INFRINGEMENT WITH RESPECT TO THE SOFTWARE.
>>Back to top
The user agrees a) not to use this Web Site in any manner which could damage, disable, overburden or impair this Web Site; b) not to interfere with the security of, or otherwise abuse, this Web Site, or any services, system resources, accounts, servers or networks connected to or accessible through this Site or affiliated or linked sites; c) not to disrupt or interfere with any other person's use and enjoyment of this Site or affiliated or linked sites; d) not to upload, post or otherwise transmit on this Web Site any viruses or other harmful, disruptive or destructive files or computer programs; e) not to use any robot, spider or other automatic device, or manual process to monitor or copy the web pages or the content contained at this Site; f) not to use or attempt to use another's account, service or system without authorization from Brook Electrical Supply, or create or use a false identity on this Web Site; g) not to transmit on this Site spam, chain letters, junk mail or any other type of unsolicited mass e-mail; and h) not to attempt to obtain unauthorized access to this Site or portions of this Site which are restricted from general access. In addition, you agree that you are solely responsible for actions and communications undertaken or transmitted to or for your account, and that you will comply with all applicable laws that relate to your use or activities on this Web Site.
>>Back to top
10/ Jurisdiction and Choice of Law
>>Back to top